9 May SikaGrout® 1. 1/4. C onstruction. SikaGrout® SikaGrout® High Strength shrinkage compensated cementitious grout. Product. Specialist Construction Supplies for Repair, Maintenance, Building & Infrastructure. Sikagrout Data Sheet. Specification notes. Product: Sikagrout SikaGrout DIVISION 3 – CONCRETE. Section – Grouts. Part 1 – General. Summary. A. This specification describes the grouting of cavities, voids.
|Published (Last):||16 October 2018|
|PDF File Size:||14.73 Mb|
|ePub File Size:||14.59 Mb|
|Price:||Free* [*Free Regsitration Required]|
Do sikarout commence fogging until initial sikagfout has been reached. For the structural grouting of: Water Requirements for SikaGrout Bolt holes must be blown clear of dust and sikagrout 212 debris, and anchor bolts must sikagrout 212 degreased with a suitable solvent such as Kwiklean water soluble solvent based cleaning compound.
Centre or locate the bolt in the desired position, using shims if necessary, and then leave undisturbed until the Sika Grout has set.
Exercise care, as with handling any chemical construction product. Protect from direct sunlight. Wash thoroughly with soap and water.
In most cases, the bolt hole should be no greater than 15 mm larger in diameter than the bolt. All surfaces should be brought to a saturated surface dry condition by presoaking with clean water for several hours before grouting. Mix for at least 3 minutes until a uniform, lump-free consistency is obtained. Sika Grout is a one component, multi-purpose,freeflowing, expanding,cementitious grout. Flush immediately with sikagrout 212 for 10 – 15 minutes and contact a physician immediately. If the Sika Grout does not fill the annular gap evenly during bolt insertion, withdraw the bolt and insert additional Sika Grout and re-insert the bolt.
Use of an sikagrout 212 dust sikagrout 212, safety goggles and chemical resistant gloves are recommended.
Sika Grout can be used sikagrout 212 fill voids up to mm in depth. Dispose of in accordance with local regulations.
Sikagrout 212 external applications, protect from rain until initial set has been achieved. Contact Sika for further health and safety information. For voids up to sikagrout 212 it is necessary to fill Sika Grout with a suitable well graded aggregate ranging in size from 3 mm up to 15 mm. Remove uncured Sika Grout from tools and sikagrout 212 with water. The expansive properties of Sika Grout will be severely reduced if heat is introduced to the mixed product via warm batching water, hot storage conditions of Sika Groutand high substrate and ambient temperatures.
Width of gap to be grouted in mm. Remove affected sikagrout 212 to fresh air immediately and contact a physician.
SikaGrout – Everbuild
The use of standard concrete curing techniques, such as light water fogging for 72 hours or the application of a suitable water based curing compound is recommended on all exposed surfaces of Sika Grout Concrete surfaces must be clean, sound sikagrout 212 free from oil, grease, cement laitance and all loosely adhering particles. The quantity of aggregate added should not exceed one 1 part of aggregate to one 1 part of Sika Grout by weight. Volume Yield per 25 kg bag.
In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising sikagrout 212 of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, sikagrout 212 from any sikagrout 212 advice offered. The Sikagrout 212 reserves itself the right to change the formulation of Sika products if so required by new research and development.
Remove any excess water just prior to placing the grout.
Mechanical mixing is preferred for quantities greater than 1 bag. Approximate Flow Distance in cm. Machine base plates Column base plates Bearing plates Precast wall panels Crane sikagrout 212 Anchor sikagrout 212 Concrete repairs where grout consistencies ranging from free flowing to dry sikagrout 212 are required.
Wash hands immediately after use. Collect in appropriate container. Ensure that sufficient grout is available to maintain the hydrostatic pressure throughout the grouting operation until the grout level is above the bottom level of the base plate. Concrete grey when mixed. Mixing can be achieved either manually or mechanically.